Nanorepel™ NC-2807 is a user-friendly, solvent-based, ready-to-use formulation for coating non absorbent surfaces as e.g. glass or ceramics.
The consumption depends on the application method and is approx. 10 ml/m².
- water repellent
Before applying the formulation, the surface to be sealed needs to be cleaned thoroughly.
Do not apply the formulation at temperatures below 10 °C. During application, the temperature should not exceed 30 °C. Take care of proper ventilation in case of indoor application. Do not apply onto warm surfaces or in direct sunlight. Do not use this formulation next to open fire, sources of ignition or hot objects.
Apply the formulation evenly on the surface, and remove any surplus product by polishing with a soft cloth.
The desired effect occurs already after approx. 30 minutes. An optimal performance is achieved after a drying period of approx. 24 hours.